POSTIUM Online Mall
Company top image
  • • High Dynamic Range(HDR) Display
  • The OBM series provides the function to display the High Dynamic Range footage.
    Postium HDR function allows users to view both highlights and shadow detail of scenes at tha same time, thus resulting in more natural and realistic images.
    The OBM series supports PQ EOTF (SMPTE ST 2084), Hybrid Log Gamma and S-Log3.
  • High Dynamic Range(HDR) Display Function image
  • OBM-HDR provides the function of comparing HDR and SDR(Standard Dynamic Range) on the displayed image on the OBM series simultaneously.
  • High Dynamic Range(HDR) Display Function image
  • • Focus Assist
  • This function controls the aperture level of a video signal, and displays images on screen with sharpened edges to help camera focus operation.
  • • Fast Mode
  • This function minimize the interlaced video processing time delay. This mode is also useful when displaying fast-motion interlaced video content and when reducing the delay between video and audio.
  • Internal Video Processing Time
    Fast Mode image
  • • False Color
  • This function evaluates the Luma(Y') level of the input image. If the certain Y' level is set, the pixels with the designated Luma(Y') level are displayed with the zebra pattern or the color pattern. There are three modes in OBM False Color.
  • False Color image
  • • Adjustable Gamma
  • Gamma value is adjustable from 1.0 to 3.0 as user's preference to monitor in the dark area of the picture.
    Any pictures taken in either light or dark environment can be easily watched or analyzed.
  • Adjustable Gamma image
  • • Camera Log Selection
  • The OBM series has the integrated camera LUT of the various camera manufacturers. It allows users to load the following camera logs.
    Log-C, C-Log / S-Log2, S-Log3 / J-Log1 The more camera LUTs will be updated.
  • • Camera Log Mapped SDI Loopout
  • This function allows to load the camera log to the original image and then send the camera log mapped image to another monitor through SDI loop out.
  • Camera Log Mapped SDI Loopout image
  • • Remote Control via Ethernet
  • The OBM series can be connected via Ethernet connection and controlled remotely on the network.
  • Remote Control via Ethernet image
  • • Closed Caption
  • The OBM series can display closed captions with an SDI input. It supports the CEA-708(HD-SDI closed captioning standard) and CEA-608(SD-SDI closed captioning standard).
  • • Waveform & Vector Scope Position Changeable
  • The position of Waveform and Vectro Scope can be changed among Left Top, Right Top, Right Bottom, Left Bottom.
  • Waveform & Vector Scope Position Changeable image
  • • Waveform & Vector Scope Size Adjustable
  • The image size of Waveform and Vector Scope can be changed between Small and Large.
  • Waveform & Vector Scope Position Changeable image
  • • System Data Copy
  • This function allows users to save the monitor configuration and adjustment settings on the USB memory stick and load them to other monitors. This is useful for multiple monitor systems, allowing the transfer of one monitor's setup and adjustment data to another.
  • • Various Markers
  • The OBM series can display various markers, including aspect marker, area marker, and center marker. In addition, the detailed display settings of each marker are allowed. For example, the color, brightness, horizontal/vertical position, and thickness of aspect markers can all be adjusted.
    Custom Marker allows the users to place top, bottom, left, right marker lines as they want.
  • Various Markers image
  • • Gamut Error
  • The total range of the SDI 10bit signal is 0 to 1023. The range 0 to 3 and 1020 to 1023 are the reserved values for Sync, and the total video signal range is 4 to 1019.
    In a video signal, each primary component should lie between 0 and 100% of the video range between black level and peak level (R and G and B).
    Ideally, video levels should lie within the specified limits so that programs can be distributed without adjustment.

    100% White pattern : Y - 940, Cb - 512, Cr - 512
    0% Black pattern : Y - 64, Cb - 512, Cr - 512
    Expected Video Range : 64 to 940
  • Gamut Error image
  • In practice, it is difficult to avoid generating signals slightly out of range, and it is considered reasonable to allow a small tolerance. Therefore, the EBU recommends that the RGB components and the corresponding Luminance (Y) signal should not normally exceed the “preferred minimum/maximum” range of digital sample levels in the table above.

  • Type 1: Black Zebra

    When the targeted color space is selected as BT.709, the pixels outside of the targeted color space are displayed as Black Zebra.
    The pixels over Y Maximum, Chroma Maximum, RGB Maximum are displayed as Black Zebra, and the pixels below Y Minimum, Chroma Minimum, RGB Minimum are also displayed as Black Zebra.
  • Gamut Error image

  • Type 2: Black & White Zebra

    When the targeted color space is selected as BT.709, the pixels outside of the targeted color space are displayed as Black or White Zebra. The pixels over Y Maximum, Chroma Maximum, RGB Maximum are displayed as Black Zebra, and the pixels below Y Minimum, Chroma Minimum, RGB Minimum are displayed as White Zebra.
  • Gamut Error image

  • Type 3: Mono

    When the targeted color space is selected as BT.709, the pixels inside of the targeted color space are displayed as Mono, and the pixels outside of the targeted color space are displayed as the color. In this type, black and white area is not recognized.
  • Gamut Error image
  • • PBP(Picture-by-Picture)
  • The unique Picture-by-Picture function of the OBM P series allows two different SDI input signals to be displayed on the screen simultaneously. This function is very convenient for making instant adjustments to two input sources, because there is no need to individually adjust the different characteristics of two monitors. The OBM P series offers the various Picture-by-Picture modes as follows.
  • PBP image
  • • 1:1 Scan in PBP Mode
  • This function allows to magnify the either image of the two inputs in PBP mode.
  • PBP image
  • • HDR Waveform
  • When HDR more is set on, HDR Waveform is displayed on screen.
  • HDR Waveform image
  • • Dual Waveform Monitor & Vector Scope
  • The OBM P series can display Waveform, Vector Scope on the two different SDI videos respectively, which is very useful and convenient for dual monitoring.
  • PBP image
  • • WIPE
  • The area of the two pictures to be displayed is selected using a vertical WIPE pattern. This function is useful when picture detail of the two images must be examined on a pixel basis.
  • PBP image
  • • In-Monitor Display(IMD)
  • The image source names and tally information can be displayed on the screen, with an external remote function via Ethernet. The TSL system protocol is supported. The color of the source name and tally color can be selectable among White, Red, Green, Blue, Yellow, Cyan, Magenta.
  • In-Monitor Display(IMD) image
  • • Color Settings Adjustable to Either of Two Images in PBP Mode
  • The OBM PBP function allows to adjust the color settings to either of the two images and compare the two images. HDR / SDR, Brightness, Contrast, Color Temperature, Camera Lut, and other color settings can be changed.
  • In-Monitor Display(IMD) image
  • This unique function allows to display the same image side by side, change the color settings to one image, and then compare the original image and the changed image on the screen.
  • In-Monitor Display(IMD) image
  • • Password Lock for User Preset
  • When multiple users share the same monitor, each user can register his/her own password for color temperature and user preset data. This ensures the users correctly recall their preset data, and keep preset information safe from unauthorized use.
  • • Custom 3D LUT File Import
  • The OBM series allow the user to import 3D Look-up Table for accurate and consistent color matching between individual displays as well as using customized ‘looks’ that have been created by 3rd party color-grading applications. 32ˆ³, 33ˆ³, 64ˆ³, 65ˆ³ cube file are supported.
  • Custom 3D LUT File Import image
  • • Focus Assist
  • This function controls the aperture level of a video signal, and displays images on screen with sharpened edges to help camera focus operation.
  • Focus Assist image